Introduction
Let’s get straight to it. We built this 365nm mercury vapor lamp for the jobs where you need raw, precise UV power. The kind of work where you need to cure, heat, or kickstart a material with absolute consistency. This isn’t some gentle ambient light. It’s a focused tool, pure and simple. It’s engineered to give you the same strong results, over and over again, right where the work gets done.
The Nitty-Gritty: Power, Voltage, and Size
Here’s the thing about the specs—every number is there for a reason. That 400V high-voltage strike? It’s what gets the mercury vapor fired up and keeps that arc stable the whole length of the lamp. That power is exactly what you need to hit that sweet spot of energy density and keep the 365nm output strong, even when the machine is running hard. And the size? It’s around 300mm long, a footprint that fits neatly into standard machine spaces and curing lanes. No fuss.
What It’s Built With: Quartz, Coating, and the R7s Connector
We use a quartz envelope because it can take the heat. It handles the intense temperature inside and stays steady, even when the lamp cycles on and off again and again. Inside, a special coating is tuned to focus the spectrum and push out as much of that 365nm as possible. And the R7s connector? It’s just a tough, practical choice. It locks the lamp in place, carries the current without a wobble, and makes swapping out a lamp a quick, easy job when it’s time for maintenance.
Where It Shines and What to Expect
You’ll run this lamp wherever you need UV-curable inks, adhesives, or coatings to set fast. Or when you need heat concentrated in one tight spot, without warming up the whole machine. That combo of 365nm output, high voltage, and a compact size gives you serious control over the process. Just keep one thing in mind—the high wattage and 400V operation deliver serious power, so your machine needs to be set up for the heat and the electrical demands.